|
Dimensions:
- Machine: 5' wide x 16' long x 10' high
- Electrical Control Box (Free-Standing): 1' wide x 6' long x 5' high
Weight:18,000 lb.
Motor:
- Roughing Station (Drum): 30 HP Severe Duty
- Semi-Finishing Station (Drum): 30 HP Severe Duty
- Finishing Station (Drum): 15 HP Severe Duty
- Extra Fine Finishing Station (Disc): 15 HP Severe Duty
- 480 Volt - 3 Phase Optional: (240 Volts)
Coolant Requirement:
- 10-12 gal./min./station
- Coolant Delivery/Cleaning Manifolds
- Thru-Spindle Coolant Of Vertical Heads
Production Rate:
- Three Programmable Speeds Producing 12-18 Blocks/minute.
- 22 Blocks/minute maximum
Machine Features:
- Rigid, heavy-duty welded construction Belt/Platen multiple speed conveyor system (8-10-12 ft./min.)
- Modular grinding cell configuration Accommodates up to four stations Head Spindles
- Diamond grinding drums skewed for improved finish & extended life
- Special belt drive system to suppress noise levels
- Centralized grease fittings
- Ergonomic design
|
|
 |
|
Block Height Adjustment:
- Microprocessor controlled height adjustment for block size changes
- Pre-programmed settings for 4, 6, 8, 10, 12" CMU's & 16" specialty blocks
- Height adjustment of all grinding stations can be lowered uniformly for grinding opposite side of block -- at push of a button
- All heads simultaneously move up & down automatically determined by restrictor bar position
- Push-button manual over-ride to change grind depth to non-standards
- Hand-held ìZero-Out" control for calibrating individual drums & vertical wheels
- Safety Feature--Automatic block height restrictor bar to prevent crashes
Drum Information:
- Quick & easy diamond drum or disc change-over
- Drums can be recoated by Di-Coat Corp. using high grade GE Diamond
- Reconditioned or new drums supplied ready to mount with pre-installed pillow block bearings
Control Panel:
- Free-standing control panel permits ease of operation & floor space optimization
- Display prompts operator of required action
- Single command to select 1st, or 2nd, side grind height
- Digital display of fine adjustment of grinding heads
- Each grind station may be individually active or off-line
- Analog display of amperage draw for each grind station
- Pause mode stops conveyor but leaves grinding heads running
- Programmable stock removal setting for each station
- On-screen programming
|
|
